bioblock 360am logo transparent

Multi-Purpose Antimicrobial Nano-ceramic Clear Coat

BioBlock-360AM is an Antimicrobial formulation that helps to lower the bio burden and continuously protect treated surfaces from the colonization of microorganisms ie, virus, bacteria, mold, mildew and fungus for as long as the coating remains intact on the treated surface.

BioBlock-360AM is a non-toxic spray on solution that dries away clear and can be applied to practically any surface. It is not hazardous to humans or pets when used as directed, as it is an inert & benign material when cured.

BioBlock-360AM is a high performance, specially synthesized polysilazane polymer coating that ambient cures and develops a covalent bond with the substrate it is applied to, bonding the antimicrobial coating and that surface on a molecular level. Our product sprays on wet and dries to a clear micro-thin barrier that stops virus and other microbial colonization on treated surfaces from 30 to 90 days depending on the amount of surface wear or abrasion/friction that the coated area receives.

BioBlock-360AM is highly effective on practically any variation of polished metals, plastic, wood, glass, fabrics, fiberglass, ceramics, porous & nonporous stone surfaces. This coating is FDA Approved for use on food contact surfaces and in Health Care settings.

  • EPA Reg. No. 83019-1
  • EPA Est. No. 96461-GA-1


  • May be applied using a trigger sprayer or low pressurized backpack sprayer system. The nozzle should be adjusted to finely atomize the liquid to better penetrate soft surfaces such as carpet, drapery, etc. and on hard surfaces to achieve full and complete coverage. The goal when applying is to ONLY leave the surface “wet” to sight and touch, not flooded or running.
  • Wet completely, allow to 30-45 minutes to dry. 1 hour equivalent foot traffic.
  • May re-coat several times, allow 30 minutes minimum between coats. As coats progress, the time between application of additional coats may increase.
  • Applying additional coats before a prior application has had the opportunity to dry can cause haze or blush within the finish – that may not come out! This will never happen as long as the finish you’re spraying is dry to the touch.


[su_button url=”” style=”glass” background=”#cc0000″ size=”10″]PURCHASE[/su_button]